show ipv6 fhs statistics

Syntax

• show ipv6 fhs statistics all

• show ipv6 fhs statistics all {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

• show ipv6 fhs statistics dhcp-guard

• show ipv6 fhs statistics dhcp-guard {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

• show ipv6 fhs statistics nd-inspection

• show ipv6 fhs statistics nd-inspection {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

• show ipv6 fhs statistics ra-guard

• show ipv6 fhs statistics ra-guard {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Command Parameters

{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Displays the statistics on either a single port or a set of ports.

Identifies the slot and port in one of the following formats:

• a single slot and port (slot/port)

• a range of slots and ports (slot/port-slot/port)

• a series of slots and ports (slot/port,slot/port,slot/port)

• all ports on the same slot (slot/all)

• all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

all

Displays all IPv6 FHS statistics.

dhcp-guard

Displays DHCP-Guard statistics.

nd-inspection

Displays Neighbor Discovery Inspection statistics.

ra-guard

Displays RA-Guard statistics.

Default

None

Command Mode

Privileged EXEC